泰安扬帆数控科技有限公司为您提供自动焊接机器人等相关信息发布和资讯展示,敬请关注!
咨询服务热线:
0538-5358300

新闻资讯

推荐产品

公司新闻

自动焊接机器人实施的功能要求是什么?

来源:http://www.kazinobg.com/  发布时间:2021-08-27 浏览次数:

自动焊接机器人的功能非常有优势,不知道大家有关注过吗?普通焊接设备完全由人工经验控制。因此,如果螺母的焊接点高或低,并且装置的输出和电源的稳定性不理想,则容易发生假焊接。为了避免类似现象的发生,一方面要求焊点稳定,另一方面要求电源和运输稳定。

The function of automatic welding robot is very advantageous. Have you paid attention to it? Ordinary welding equipment is completely controlled by manual experience. Therefore, if the welding point of the nut is high or low, and the stability of the output and power supply of the device is not ideal, false welding is easy to occur. In order to avoid similar phenomena, on the one hand, the solder joint is required to be stable, on the other hand, the power supply and transportation are required to be stable.
这时候,自动按揭机器人的优势就显现出来了,因为自动管道焊接机器人可以做到这一点。您可以根据不同材料和厚度的焊接工件的电流和电压来调整焊接速度,以找到合适的焊接参数,从而减少出现焊接缺陷的可能性。
At this time, the advantages of automatic pipe welding robot appear, because automatic pipe welding robot can do this. You can adjust the welding speed according to the current and voltage of welding workpieces with different materials and thicknesses to find the appropriate welding parameters, so as to reduce the possibility of welding defects.
除了用自动管道焊接机器人代替设备外,焊接螺母之前的准备工作也非常重要。由于焊接件是由铝制成的,并且铝表面上有氧化膜,因此在焊接之前要清洁氧化膜。
In addition to replacing the equipment with automatic pipeline welding robot, the preparation before welding nuts is also very important. Since the weldment is made of aluminum and there is an oxide film on the aluminum surface, the oxide film shall be cleaned before welding.
清洁或腌制。然后在清洁氧化膜后的三个小时内使用焊接机器人进行焊接;否则,由于空气中的氧化会产生新的氧化膜,这会影响焊接的实际质量。
Clean or pickle. Then, the welding robot is used for welding within three hours after cleaning the oxide film; Otherwise, new oxide film will be produced due to oxidation in the air, which will affect the actual quality of welding.
当自动管道焊接机器人使用不熔化的氩弧焊时,产生的电弧在不熔化的电极和工件之间燃烧,并且不与金属发生化学反应的惰性气体在周围流动。的电弧形成?;じ?。即,此时自动管焊接机器人可以使钨,电弧和熔池的端部不与热影响区相邻的高温金属接触。从而有用防止氧化和吸收。
When the automatic pipe welding robot uses non melting argon arc welding, the generated arc burns between the non melting electrode and the workpiece, and the inert gas that does not react with the metal flows around. The arc forms a protective cover. That is, at this time, the automatic pipe welding robot can prevent the ends of tungsten, arc and molten pool from contacting the high-temperature metal adjacent to the heat affected zone. Thus, it is useful to prevent oxidation and absorption.
有害气体,从而形成致密的焊接接头。而且它显示出更好的机械性能。
Harmful gases to form dense welded joints. And it shows better mechanical properties.
当自动管道焊接机器人通过氩弧焊进行焊接时,焊丝将穿过焊丝轮,导电喷嘴将导电,从而在基材和焊丝之间产生电弧。焊接,熔化焊丝和基础材料并使用惯性。
When the automatic pipeline welding robot carries out welding through argon arc welding, the welding wire will pass through the welding wire wheel, and the conductive nozzle will conduct electricity, so as to generate an arc between the substrate and the welding wire. Weld, melt welding wires and base materials and use inertia.

上一篇:焊接机器人维修需要注意的三点细节
下一篇:数控切割机传动滑轴故障排除及维护!

九九国产品精,九九精品,九九精品无码专区免费,九九九九精品视频在线观看