泰安扬帆数控科技有限公司为您提供山东数控焊接设备等相关信息发布和资讯展示,敬请关注!
咨询服务热线:
0538-5358300

新闻资讯

推荐产品

公司新闻

山东数控焊接设备的3个装置

来源:http://www.kazinobg.com/  发布时间:2021-12-09 浏览次数:

通用焊接设备在我们生活中的应用是非常广泛的,具有通用性强、操作简单、经久耐用等特点,那么它的结构特点有哪些呢?下面通用焊接设备厂家来为大家做一下详细的讲解:
General welding equipment has a wide range of applications in our lives. It has the characteristics of strong versatility, simple operation, and durability. So what are its structural characteristics? The following general welding equipment manufacturers will give you a detailed explanation:
1. 机械装置
1. Mechanical device
通用焊接设备的点焊机系统由机械装置、供电装置、控制装置三大部分组成。通常状态为焊钳短行程张开,当把控制按钮切换到“通电”位置,扣动手柄开关则焊钳夹紧加压,同时电流在控制系统控制下完成一个焊接周期后恢复到短行程张开状态。
The spot welding machine system of general welding equipment is composed of three parts: mechanical device, power supply device, and control device. The normal state is that the welding tongs are opened for a short stroke. When the control button is switched to the "power on" position, the handle switch is pressed to clamp and pressurize the welding tongs. At the same time, the current returns to the short stroke after completing a welding cycle under the control of the control system. Open state.
2. 供电装置
2. Power supply device
主电力电路由电阻焊变压器、可控硅单元、主电力开关、焊接回路等组成。焊钳的强度、刚度、发热要满足一定要求,并且要具有良好的导电和导热性,同时要求焊钳采用通水冷却,所以选择焊钳电极臂能够承受400kg压力的新型焊钳。
The main power circuit is composed of resistance welding transformer, thyristor unit, main power switch, welding circuit, etc. The strength, rigidity, and heat generation of the welding tongs must meet certain requirements, and it must have good electrical and thermal conductivity. At the same time, the welding tongs are required to be cooled by water. Therefore, a new type of welding tongs that can withstand a pressure of 400kg is selected for the electrode arm of the welding tongs.
3. 控制装置
3. Control device
控制装置主要提供信号控制电阻焊机动作接通和切断焊接电流,控制焊接电流值,进行故障监测和处理。
以上就是山东数控焊接设备为大家介绍的通用焊接设备的结构特点,希望通过上面的介绍能够对大家有一些实质性的帮助,如果还想了解更多信息可以直接关注我们公司网址。
The control device mainly provides signals to control the action of the resistance welding machine to turn on and off the welding current, control the value of the welding current, and perform fault monitoring and handling.
The above is the structural characteristics of the general welding equipment introduced by Shandong CNC welding equipment. I hope that the above introduction can give you some substantial help. If you want to know more information, you can directly follow our company website.

上一篇:山东焊接专机共5步操作流程掌握吗
下一篇:常见自动焊接技术设备管理问题

九九国产品精,九九精品,九九精品无码专区免费,九九九九精品视频在线观看